 DAF indonesia |
|---|
 DAF Alpha 160 |
 DAF Alpha +160 |
 DAF Alpha 3x |
 DAF Alpha+ 20 |
 DAF Alpha 160 with Flocculator |
 Daf transportDaf transport indonesia |
 DAF Alpha 10 |
The Alpha Dissolved Air Flotation (DAF) system:
The Alpha flotation units are designed to treat wastewater with high solids loading. The capacity of the Alpha unit ranges from 5 m3/h up to 200m3/h.
The Alpha series are designed to create the optimal circumstances for easy separation of the solids. The large free surface area and long retention time guarantee an optimal separation performance. The solids are collected in the sludge thickener and transported to the sludge cone with a low friction scraper system. The sludge can be discharged with the sludge pump for thickening or discharge.
The Alpha+ flotation unit is equipped with a sludge conveyor for discharge of heavy solids.
The advantages of the Alpha DAF unit
-
Suitable for heavily polluted wastewater.
-
Large free surface area and long retention time for optimal separation performance.
-
Low maintenance through low friction skimmer system.
-
Efficient sludge discharge system by gravity.
-
Efficient saturated water supply system.
-
Completely manufactured out of stainless steel.
-
Units up to 80 m3/h are suitable for transport in a sea container.
 Delta |
|---|
 Delta DAF 75 Mexico |
 DAF Delta 75 |
 DAF Delta 75 (2) |
The Delta Dissolved Air Flotation (DAF) system:
The Delta flotation units are designed to treat wastewater with medium solids loading. The capacity of the Delta unit ranges from 5 to 200 m3/hr.
The Delta series are designed to treat the wastewater using the Kemeo Platepack System. The Kemeo Platepack System multiplies the separation surface for effective separation, making it possible to treat a large amount of wastewater on a small footprint. The solids are collected in the sludge thickener and transported to the sludge cone with a low friction scraper system. The sludge can be discharged with the sludge pump for thickening or discharge. The Delta+ flotation unit is equipped with a sludge conveyor for discharge of heavy solids.
The advantages of the Delta DAF unit.
-
Suitable for medium polluted wastewater, COD up to 4.000mg/l.
-
Very compact design, small footprint compared to capacity.
-
Kemeo Platepack System for optimum separation performance.
-
Low maintenance through low friction skimmer system.
-
Efficient sludge discharge system by gravity.
-
Efficient saturated water supply system.
-
Completely manufactured out of stainless steel.
-
Units up to 150 m3/h are suitable for transport in a sea container.
 DAF Gamma (2) |
|---|
 101bp29iv |
 DAF Gamma 300 |
 DAF Gamma 375 |
The Gamma Dissolved Air Flotation (DAF) system:
The Gamma flotation units are designed to treat waste water with medium solids loading. The capacity of the Gamma units range from 225 to 600 m3/hr.
The Gamma series are designed to treat high flows of wastewater using the Kemeo Platepack System. The Kemeo Platepack System multiplies the separation surface for effective separation, making it possible to treat a large amount of wastewater on a small footprint. The solids are collected in the sludge thickener and transported to the sludge cone with a low friction scraper system. The sludge can be discharged with the sludge pump for thickening or discharge.
The advantages of the Gamma DAF unit.
-
Suitable for low to medium polluted wastewater, COD up to 3.500mg/l.
-
Suitable for very high flows up to 1000 m3/hr for a single unit.
-
Compact design, small footprint compared to capacity.
-
Kemeo Platepack System for optimum separation performance.
-
Low maintenance through low friction skimmer system.
-
Efficient sludge discharge system by gravity.
-
Efficient saturated water supply system.
-
Completely manufactured out of stainless steel.
-
Units up to 300 m3/h are suitable for transport in a sea container.
 Sigma |
|---|
 DAF visualisation |
 heavy loaded daf |
The Sigma Dissolved Air Flotation (DAF) system:
The sigma flotation unit is designed to treat wastewater with medium to high solids loading. The capacity of the Sigma units ranges from 500 to 1000 m3/hr.
The Sigma series are designed to create the optimal circumstances for easy separation of the solids. The large free surface area and long retention time guarantee an optimal separation performance. The solids are collected in the sludge thickener and transported to the sludge cone with a low friction scraper system. The sludge can be discharged with the sludge pump for thickening or discharge.
The advantages of the Sigma DAF unit.
-
The concrete tank is built on site. Kemeo supplies internals only.
-
The rectangular concrete flotation tank is be suitable for medium to highly polluted wastewater, COD up to 10.000mg/l.
-
Suitable for high flows up to 1000 m3/hr for a single unit.
-
Low maintenance through low friction skimmer system.
-
Optional bottom skimmer.
-
Efficient saturated water supply system.
-
Parts manufactured out of stainless steel.
-
Parts are suitable for transport in a standard sea container.